Product Introduction

In order to improve the valuation process and order fulfillment, below we present a specific scope of data that a complete order should contain:

•  
• - The arrangement of meshes (stagger, straight, or otherwise) as well as the distance between the eyelets 
  - Margins (area without perforation), optionally mark their absence
  
  It would also be helpful if you could specify your needs precisely about the purpose of specific products and specify the expected goods delivery time. Please also pay attention to some key parameters and dependencies that have a significant impact on the final price of the product.
  
  - Type and thickness of the raw material - The cheapest material is steel sheet, however, using more durable materials, you can reduce the thickness to obtain similar strength. It should also be remembered that the thinner material perforates faster.
  
  - The size of the holes - the diameter of the hole should not be smaller than the thickness of the material, and preferably if the mesh has a diameter about twice as large as the thickness of the sheet.
  Perforated sheets made in accordance with the standards are cheaper and faster in perforation
  
  - The clearance should not exceed 65% so as not to cause distortion.

Product Categories

Perforated mesh is also widely used in

- Chemical machinery,
- Pharmaceutical equipment,
- Food and beverage machinery,
- Cigarette machinery, harvesters,
- Dry cleaning machine, ironing table,
- Silencer equipment,
- Refrigeration equipment (central air conditioning)
- Craft making,
- Papermaking,
- Hydraulic accessories,
- Filtration equipment and other industries.

1. 01.Technical parameters
   
   재료: ordinary steel, abrasion-resistant, heat-resistant, stainless, acid-resistant, aluminum, copper, brass, bronze, plastics, rubbers.
   
   Format: 
   thickness up to 18 mm, width up to 2.000 mm, length up to 6,000 mm. For some assortments, it is possible to perforate the coils in the coils (coil width Format: up to 1600 mm). 
   개별 천공 유형의 경우 시트의 두께와 너비에 제한이 있을 수 있으며 천공되지 않은 기술적 여백을 남겨두어야 할 필요성이 있을 수 있습니다.
   
   Standard operations: 
   단일 교정, 크기에 맞게 절단 및 팔레트 포장.
   
   Additional operations: 
   bending, rolling, pressing, trapezoidal, framing, welding, welding, powder coating, wiping/cleaning with oil, etc.

2. 02.The structure of the hole
   
   판금의 구멍은 생산 과정에서 생성된 세 부분으로 구성됩니다.
   
   구멍의 구조
   1. Zone of dents
   2. Cutting zone
   3. Extraction area
   
   03. Product description
   일반적인 시트는 천공되지 않은 가로 및 세로 여백으로 생산됩니다.
   
   상담 후 전체 천공 분야가 포함된 고객 도면 및 시트에 의한 천공 가능성도 있습니다. 기본적으로 모든 시트는 천공 후 곧게 펴집니다. 또한 고객이 기성 부품을 구매할 수 있도록 제품의 추가 처리 서비스도 제공합니다.

Product Parameters

Detailed Photos