Product Introduction

In order to improve the valuation process and order fulfillment, below we present a specific scope of data that a complete order should contain:

•  
• - The arrangement of meshes (stagger, straight, or otherwise) as well as the distance between the eyelets 
  - Margins (area without perforation), optionally mark their absence
  
  It would also be helpful if you could specify your needs precisely about the purpose of specific products and specify the expected goods delivery time. Please also pay attention to some key parameters and dependencies that have a significant impact on the final price of the product.
  
  - Type and thickness of the raw material - The cheapest material is steel sheet, however, using more durable materials, you can reduce the thickness to obtain similar strength. It should also be remembered that the thinner material perforates faster.
  
  - The size of the holes - the diameter of the hole should not be smaller than the thickness of the material, and preferably if the mesh has a diameter about twice as large as the thickness of the sheet.
  Perforated sheets made in accordance with the standards are cheaper and faster in perforation
  
  - The clearance should not exceed 65% so as not to cause distortion.

Product Categories

Perforated mesh is also widely used in

- Chemical machinery,
- Pharmaceutical equipment,
- Food and beverage machinery,
- Cigarette machinery, harvesters,
- Dry cleaning machine, ironing table,
- Silencer equipment,
- Refrigeration equipment (central air conditioning)
- Craft making,
- Papermaking,
- Hydraulic accessories,
- Filtration equipment and other industries.

1. 01.Technical parameters
   
   材料： ordinary steel, abrasion-resistant, heat-resistant, stainless, acid-resistant, aluminum, copper, brass, bronze, plastics, rubbers.
   
   Format: 
   thickness up to 18 mm, width up to 2.000 mm, length up to 6,000 mm. For some assortments, it is possible to perforate the coils in the coils (coil width Format: up to 1600 mm). 
   個々のタイプの穿孔では、シートの厚さと幅に制限があり、穿孔されていない技術的マージンを残す必要がある場合があります。
   
   Standard operations: 
   単一の矯正、サイズに合わせた切断、パレットへの梱包。
   
   Additional operations: 
   bending, rolling, pressing, trapezoidal, framing, welding, welding, powder coating, wiping/cleaning with oil, etc.

2. 02.The structure of the hole
   
   板金の穴は、製造プロセス中に作成される 3 つの部分で構成されます。
   
   穴の構造
   1. Zone of dents
   2. Cutting zone
   3. Extraction area
   
   03. Product description
   一般的なシートは、横方向および縦方向のマージンに穴があけられていない状態で製造されます。
   
   ご相談の上、お客様の図面や完全な穿孔フィールドを備えたシートによる穿孔も可能です。標準では、すべてのシートは穿孔後に矯正されますが、さらに製品のさらなる加工サービスも提供しており、お客様は既製品の部品を購入することができます。

Product Parameters

Detailed Photos