Product Introduction
Frame Guardrail Nets Have A Wide Range Of Uses And Are More Popular Than Ordinary Guardrail Nets. The Columns Can Be Processed Into Movable Forms, Which Is Convenient For Users To Use In Different Situations. In Addition, Frame Guardrail Nets Have Very Good Impact Resistance And Have Better Endurance Than Ordinary Guardrail Nets. Be Twice As Strong.
Frame Guardrail Nets Are Widely Used In Industrial Parks, Residential Areas, Commercial Buildings, Public Places, Sports Venues And Other Places For Isolation, Fencing, Safety Protection And Beautification Of The Environment. Different Frame Guardrail Nets Have Become An Important Choice For Protecting And Decorating Buildings With Their Unique Structures And Appearance Designs.
Product Advantages
Beautiful, Durable, And Quick To Install, It Is An Ideal Metal Mesh Wall And Has Been Widely Used In Various Industries. Hot-Dip Galvanizing Has Strong Anti-Corrosion Performance And Low Cost.
The Frame Guardrail Net Uses High-Quality Wire Rods As Raw Materials And Is A Welded Mesh Protected By Three Layers Of Galvanizing, Pre-Coating Primer And High-Adhesion Powder Spraying. It Has The Characteristics Of Long-Term Corrosion Resistance And UV Resistance. The Surface Treatment Of This Kind Of Guardrail Net Is Galvanized And Spray-Coated, Or You Can Choose Either One, And The Top End Is Covered With A Plastic Cover Or A Rainproof Cap.
Depending On The Environment And Installation Method, Methods Such As Pre-Embedding 50cm Or Adding A Base Can Be Used. Connect The Mesh And Columns Of The Frame Guardrail Net With Screws And Various Special Plastic Or Iron Clips. All Screws Are Automatically Anti-Theft. The Accessories Used Can Also Be Designed According To Customers' Specific Requirements.
Product Parameters
Mesh Hole (mm): |
75X150 80X160 |
Mesh (mm): |
1800X3000 |
The frame (mm): |
20X30X1.5 20X30X1.0 |
Mesh Before Dipping (mm): |
3.0-7.0 |
After Mesh Molding (mm): |
3.5-7.0 |
Column Size (mm): |
48X20X2200/40X40X1.5X2200 |
Overall Bending: |
30° |
Bending Length (mm): |
300 |
Column Spacing (mm): |
3000 |
Column Embedded (mm): |
250-300 |
Embedded Foundation (mm): |
500X300X300 Or 400X400X400 |
Surface Treatment: |
Dip Molding, Spray Molding, Cold Galvanizing, Hot Dip Galvanizing, |
Detailed Photos